Download Datasheet (PDF)

Mounting Hardware

MOUNTING BRACKETS

Brackets fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel and have no suffix to part number. Spring steel brackets are indicated with an "S" suffix following part number.

Standard		Spring steel		Mtg screw size (max.)	For resistors (power ratings)
Avail.	Part #	Avail.	Part #
A	5	C	5S	6	8, 12 watt
B	7	C	7S	6	20 watt
A	9	C	9S	6	25, 50, 75 watt
A	12	A	12S	10	100 watt
A	18	A	18S	10	175, 225 watt

Key:
A = Most popular standard values
B = Standard values
C = Non-standard values subject to minimum handling charge per item

THRU BOLTS

Thru-Bolts, with centering mica insulating washers, permit perpendicular mounting of 200, 210 and 270 type resistors to panels up to 0.25" thick.

Avail.	Part No.	Bolt size		For resistors (power rating)
		Length	No.
C	7PA5	1.75"	8	8 watt
A	7PA10	2.5"	8	12 watt
C	7PA20	2.75"	8	20 watt
A	7PA25	2.75"	10	25 watt
A	7PA50	4.75"	10	50 watt
C	7PA75	6.75"	10	75 watt
A	7PA100	7.313"	10	100 watt
A	7PA160	9.5"	0.25"	175 watt
A	7PA200	11.5"	0.25"	225 watt

WASHERS

Metal Centering

Avail.	Part No.	Diameter		For max. screw size	For resistors (power ratings)
		Outer	Inner
A	6000	0.563"	0.190	#10	25, 50, 75 watt
A	6001	0.75"	0.190	#10	100 watt
A	6003	1.125"	0.250	0.25"	175, 225 watt

Mica insulating

Avail.	Part No.	Diameter		For resistors (power ratings)
		Outer	Inner
A	6010	0.75"	0.063"	25, 50, 75 watt
A	6011*	0.75"	0.313"	25, 50, 75 watt
C	6012	1"	0.063"	100 watt
B	6013*	1"	0.5"	100 watt
C	6014	1.25"	0.063"	core 1" O.D. x 0.625" I.D.
A	6015*	1.25"	0.625"	core 1" O.D. x 0.625" I.D.
B	6016	1.5"	0.063"	175, 225 watt
A	6017*	1.5"	0.75"	175, 225 watt

* Use with centering washers.

DOUBLE THUMB SCREW LUG

(Part Number 2160) The double thumb screw adjustable lug permits easier adjustment and less chance of damage to resistance wire. Available for 1.125" cores only.

THRU-BOLTS AND MOUNTING BRACKETS

Sturdy plated steel brackets, along with thru-bolts, centering washers and insulating washers (included), allow for secure mounting of 210 type and 270 type resistors. Mounting brackets are available in either slotted (one with end-slot/one with side-slot) or elongated styles.

Part No. Dimensions A B C D E F G H Slotted 6101-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- -- 6104-- 0.781" -- 0.75" 0.031" 0.438" 0.25" -- -- 6110-- 1" -- 1.125" 0.063" 0.813" 0.313" -- -- Elongated 6120-- 1" -- 0.5" 0.031" 0.422" 0.219" .438 .750 6126-- 1.5" -- 1.25" 0.063" 0.438" 0.281" .563 .875 6127-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875 6128-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875 6129-- 1.5" 2" 1.25" 0.063" 0.438" 0.281" .563 .875

Standard Core Length (in) Bolt Length (in) 13/4 21/4 2 21/2 21/4 23/4 4 43/4 6 65/8 61/2 7 81/2 91/8 101/2 111/8

ADJUSTABLE LUGS FOR 210 SERIES

One standard screwdriver type adjustable lug is supplied with each unit.

Two types of lugs can be ordered separetely: standard or with a silver contact button; both types are available with either a screwdriver type lug.

Resistor core diam. (in./mm)	Standard		Silver
	Avail.	Part #	Avail.	Part #
0.313 / 7.94	C	2115	C	2116
0.563 / 14.3	A	2121	B	2123
0.750 / 19.05	A	2125	C	2127
1.125 / 28.58	B	2133	C	2135