Standard part numbers Datasheet in PDF for printing

TAH Series

The TAH20 is a completely encapsulated thick film resistor in the TO220 package outline. Rated for 20 watts @ 25°C case temperature, these resistors are electrically isolated, and molded in a high temperature case.

Designed for heat sink mounting, the symmetrical package is ready for use with snap-on style heat sinks (we recommend use of thermal grease). The TAH20 Series has very low inductance, and is available in a wide range of resistance values in standard 5% tolerance. 1% tolerance is available by special order.

TEST DATA

Load Life	MIL-R-39009, 2000 Hours @ Rated Pwr	delta-R = ± (1.0% + 0.001) ohm
Thermal Shock	MIL-R-STD-202, Method 107, Cond. F	delta-R = ± (0.3% + 0.001) ohm max
High Frequency Vibration	MIL-R-STD-202, Method 204, Cond. D	delta-R = ± (0.2% + 0.001) ohm max
Terminal Strength	MIL-R-STD-202, Method 211, Cond. A (Pull Test) 2.4N	delta-R = ± (0.2% + 0.001) ohm max
Moisture Resistance	MIL-R-STD-202, Method 106	delta-RDR = ± (0.5% + 0.01) ohm max

FEATURES

• 20 Watt Power Rating at 25°C Case Temperature
• High Pulse Tolerant Design
• Quick-snap Molded Package
• Very Low Inductance Design
• Resistor Package Electrically Isolated from Heat Sink
• Low Thermal Resistance to Heat Sink @ R_TH<6.25°C/W
• Tube Packaging Available

• Frequency Conversion
• High Frequency Balancing
• Snubbers

Electrical

• Resistance Range: 0.05 ohm to 10K ohm, other values available upon request
• Tolerance: <0.1Ω: 5% only
  0.1Ω-1MΩ: 5% std.; 1% available
• Temperature Coefficient: Referenced to 25°C, delta-R taken at +105°C
  1 to 10ohm ±(100ppm+0.002 ohm)/°C
  10 ohm & up ±50ppm/°C
• Max Operating Voltage: 350V
• Dielectric Strength: 1,800 VAC
• Power Rating: 20W @ 25°C Case Temperature. See derating curve
• Insulation Resistance: 10G ohm min.
• Momentary Overload: 2x rated power for 5 seconds where applied voltage </=1.5 times max. operating voltage. delta-R ±(0.3% + 0.001 ohm) max.
• Case Material: KMC-125 epoxy
• Terminal Material: Copper
• Terminal Plating: Lead Free Solder (97% Tin, 3% Silver)
• Mounting: Requires the use of a snap-on style heat sink. A thermal compound should be properly applied.
• Solder Process: The TAH20 cannot exceed 260°C for more than 10 seconds during soldering process.

HOW TO ORDER

TAH20P100RJE TAH20P10K0JE TAH20P10R0JE TAH20P150RJE TAH20P15R0JE TAH20P1K00JE TAH20P1K50JE TAH20P1R00JE TAH20P1R50JE TAH20P200RJE TAH20P20R0JE TAH20P220RJE TAH20P22R0JE

TAH20P240RJE TAH20P24R0JE TAH20P2K00JE TAH20P2K20JE TAH20P2K40JE TAH20P2R00JE TAH20P2R20JE TAH20P2R40JE TAH20P330RJE TAH20P33R0JE TAH20P390RJE TAH20P39R0JE TAH20P3K30JE

TAH20P3K90JE TAH20P3R30JE TAH20P3R90JE TAH20P470RJE TAH20P47R0JE TAH20P4K70JE TAH20P4R70JE TAH20P510RJE TAH20P51R0JE TAH20P5K10JE TAH20P5R10JE TAH20P750RJE TAH20P75R0JE

TAH20P7K50JE TAH20P7R50JE TAH20PR050JE TAH20PR100JE TAH20PR150JE TAH20PR200JE TAH20PR220JE TAH20PR240JE TAH20PR330JE TAH20PR390JE TAH20PR470JE TAH20PR510JE TAH20PR750JE