OPTIONS
- Noninductive versions (Aryton-Perry windings)
- Terminal sleeves to increase dielectric strength and maximize creepage distance
- Variety of terminal choices
- Potted or soldered wire leads including quick connect, ring, spade terminals
- Tapped models
FEATURES
- Flameproof and inorganic
- Higher power rating due to heat sink capacity
- All welded construction
- Nonhygroscopic
- High surge construction
|
SPECIFICATIONS
Electrical
- Wattage: Based on a 275°C "U" characteristic derating curve
- Temperature coefficient:
≥18 ohm, 0 ±90ppm/°C
8<18 ohm, 0 ±50ppm/°C
<8 ohm, 0 ±180ppm/°C
(TC for some watt/ohm combinations may be lower)
- Dielectric strength: Terminal to case, depends on terminal style (1500V min.)
- Creepage:
term. style 277: 1.2"
term. style 278: 0.4"
term. style 276: 0.7"
term. styles 211/252/279: 0.15"
Termination Wires
- Stranded, available in any insulation rated 125°C or higher (may require term. style 297).
- Custom cut/stripped lengths
- Can be potted or pre-soldered to terminal styles 211 or 252
- Quick connect (fully or partially insulated), ring or spade terminations available
Dielectric Sleeves
- Steatite construction
- Style 276 meets UL/NEMA 2500V RMS for one minute requirement
- Available as terminal styles 276, 277, 278, 297
|