|
The TGHG Series uses state of the art technology to provide highly reliable, non inductive performance. This resistor is ideal for many current monitoring and controls applications.
FEATURES
- Resistance values beginning at 0.5mΩ
- Non Inductive
- Four terminal Kelvin connection
- SOT 227 Package
- Four terminals to isolate measurement path from current flow path
- Accuracy in a high power package
DERATING
Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK
|
|
SPECIFICATIONS
- Heat Sink: Nickel-plated copper
- Terminal Nuts: American standard 303 stainless steel
- Standard Resistance Values: 0.5mΩ-1Ω, others on request
- Resistance Tolerances: 1%
- Pulse current: up to 500A/0.5sec, depending on ohmic value
- Temperature Coefficient: referenced to 25°C, ΔR taken at -15°C and +105°C, <60ppm/°C; <500ppm/°C for resistance range 27mΩ-49mΩ)
- Power Rating: 100W at 70°C case temperature; 50Amp permanent (higher on request)
- Dielectric strength: 1000VDC, higher value on request
- Heat Resistance: Rth <0.56K/W
- Protection class: acc. to IEC 950/CSA22.2 950/M -89 and EN 60950.88:2
- Working Temp. Range: -55°C to +155°C
- Max. Torque for Contacts: 1.3Nm 8 (static)
- Max Torque for Base Plate: 1.5 Nm (static)
- Maximum Continuous Amperage: 200 amps depending on Ohmic value
|
NEW PRODUCT ARCHIVES
Ohm's Law Calculator