Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

FPA2K Datasheet

Thick Film Power Resistor   

FPA2K product image

 

For variable speed drivers, power supplies, control devices, robotics, motor control and other power designs. The easy mounting fixture guarantees an auto calibrated pressure to the cooling plate of approx 300 N

 

Features

  • 2000 Watt operating power
  • Non- Inductive Design
  • High insulation and partial discharge performance
  • Materials in accordance with UL94-V0
  • RoHS Compliant

General Specifications

 

Electric support - Alumina ceramic metalized with ALTOX film on the bottom for improved heat transfer and optimum discharge

Encapsulation - Resin-filled epoxy casing with large creepage distance to mass, large strike distance between the terminals and high insulation resistance(CTI 600)

Resistance Element - Special design for low inductance and capacitance values. The element employs our special METOXFILM, which demonstrates stability whilst covering high wattage and pulse loading

Test Specifications

Method:

2400 W/10 sec

Tolerance Drift:

0.40%

Method:

56 days/40°C/95%

Tolerance Drift:

0.25%

Method:

-55/+125/5cycles

Tolerance Drift:

0.20%

Method:

40g/4000 times

Tolerance Drift:

0.25%

Method:

2-500Hz/10g

Tolerance Drift:

0.25%

Method:

PN 30 min on/ 30 min off

Tolerance Drift:

0.40%

Method:

200N for heaxa. thread contacts

Tolerance Drift:

0.05%

Characteristics

1R to 6K

J (5%) and K (10%)

±150ppm/ ̊C - others available on request, measured +25 ̊C to +85 ̊C

5kVdc - others available on request not exceeding maximum power

2400W at 70 ̊C for 10 sec ∆R = 0.4% max

2000W at 125 ̊C bottom case temperature resp. 60°C heat sink temp

120 A

7kVrms/50Hz/500VA , test time 1 min between case and terminal

up to 12kV normwave (1.5/50 μsec)

4kVrms < 10pC

10GΩ min at 1000V

>42mm min

> 14mm min

≥80nH typical, measuring frequecy 10kHz

≥120pF typical, measuring frequecy 10kHz

≥40pF typical, measuring frequecy 10kHz

-55 ̊C to +150 ̊C

1.8 Nm to 2Nm

1.6Nm to 1.8 Nm M4 screws

~120 g

 

Derating Curve

FPA2K Graph

 

 

Derating (thermal resist.)FPA2K: 66.6 W/K (0.015K/W) Power Rating:2000 W at 125°C bottom case temperture. Best results can be reached by using a thermal conduction to the heatsink Rth -cs<0.025˚K/W, which can be reached by using thermal transfer compound with a head conductivity of 1W/mK The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4μm

Ordering Procedure

 

Standard Resistor Series, Resistance Value, Tolerance, Connector height

 

e.g: FPA2K 10R J 30/32 mm

Dimensions

(in mm)

 

FPA2K Dimensions 1

 

Standard Terminals

Air distance: 14mm [0.5512] min.

Creeping distance: 42mm [1.6535] min.

 

 

Terminal Height 30/32 (Standard)

FPA2K Dimensions 2

 

Terminal Height 25/25 (Optional)

FPA2K Dimensions 3

 

The information contained herein does not form part of a contract and is subject to change without notice. ARCOL operate a policy of continual product development, therefore,specifications may change.

It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask ARCOL.

 

 

ARCOL UK Limited,
Threemilestone Ind. Estate,
Truro, Cornwall, TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
E [email protected]
www.arcolresistors.com

_Let us help find your solution

Contact Our Team of Experts Today

Give us a call or fill out our contact form and one of our experts will be in touch shortly.