600 Watt resistor designed for various applications including power transmission, traction, variable speed drives, power supplies, robotics, motor control and power control devices. Suitable for liquid or air cooled heat sink systems
Features
- Power Dissipation: 600 watts at max 70°C bottom case temp
- Value Range: R5 to 1M
- Tolerance Options: ±5% or ±10%
- TCR Options: ±150ppm/°C
- Maximum Voltage: 5000Vdc
- Dielectric Strength: 12000Vdc
- Special Features: Partial discharge 4Kvrms <10 pc up to 7kV. Please consult with company regarding application areas. Vibration proof. Very low inductance RoHS Compliant.
Specifications
Characteristics
Derating Curve
Ordering Procedure
Standard Resistor Specify series, watts, ohmic value, tolerance code. e.g FPA600 10R J
Pulse Rating
For pulse duration >7.5 µS and, maximum allowed voltage levels, the maximum peak energy of 0.6J is limited by the average power rating of 600W. For pulse duration times <7.5 µS it has not been possible to reliably establish maximum energy failure point, although it is known that the pulse capability is higher than the curve shown in the graph below
Whilst these parts are designed to operate in high frequency circuits, where dv/dt is faster than 250V/µS, it is recommended that the resistor is tested under worst case application conditions to ensure that unknown attribute of the application waveform are completely accounted for.
Dimensions
Other terminal dimensions available, contact ARCOL for more information
The information contained herein does not form part of a contract and is subject to change without notice. ARCOL operate a policy of continual product development therefore, specifications may change.
It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask ARCOL
ARCOL UK Limited,
Threemilestone Ind. Estate,
Truro, Cornwall, TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
E [email protected]
www.arcolresistors.com