MOX500 Series Datasheet

Thick Film, Epoxy Molded

2W at 70°C, 3W at 25°C

Metal Glaze:1.5KΩ to 5MΩ, Metal Oxide:15Ω to < 1.5KΩ

1%, 2%, 5%

Metal Glaze: 100/200ppm, Metal Oxide: 350ppm, Not all tolerances and TCR values available throughout entire resistance range

Metal glaze:100/200 ppm, Metal oxide:350 ppm

RCWV or 1000 V whichever lesser. (RCWV = rated DC or RMS AC continuos working voltage at commercial line frequency and waveform (volt) )

1000 VRMS

Copper Wire, Solder Coated axial, RoHS composition

-55º to +155ºC

Test Method:

MIL-STD-202, Method 106G

ΔR limits:

±0.20%

Test Method:

MIL-STD-202, Method 103, Condition B

ΔR limits:

±0.25%

Test Method:

MIL-STD-202, Method 213, Condition I

ΔR limits:

±0.10%

Test Method:

MIL-STD-202, Method 204, Condition D

ΔR limits:

±0.10%

Test Method:

MIL-STD-202, Method 211A, Condition A or B

ΔR limits:

±0.10%

Test Method:

DC test potential 2.5 time the rated continuous working voltage but not exceeding twice the maximum voltage specified

ΔR limits:

±0.5%

Test Method:

1000 hrs at RCWV duty cycle 1.5hr ON, 0.5 hr OFF at 70ºC ±2ºC

ΔR limits:

±2%

Test Method:

-65º to +125ºC

ΔR limits:

±0.10%

Test Method:

Temp 350ºC ±10ºC for 3 ±0.5 sec

ΔR limits:

±1%

Test Method:

IEC61000-4-5, waveform 1.2/50μS, 10 Pulses applied. Does not include values under 1KΩ

ΔR limits:

< ±1%