PCS Series Datasheet

Power Rating @70°C:

0.5W

Max Rated Current:

14.14A

Max Overload Current:

31.62A

ResistanceRange(mΩ) (±0.5%):

7~13

ResistanceRange(mΩ) (±1.0% (F), ±2.0% (G), ±5.0% (J)):

0.5~13

Material:

R0005~R002: MnCuSn, R0025~R008: MnCu, R009~R013: FeCrAl

Power Rating @70°C:

1W

Max Rated Current:

31.62A

Max Overload Current:

63.25A

ResistanceRange(mΩ) (±0.5%):

7~50

ResistanceRange(mΩ) (±1.0% (F), ±2.0% (G), ±5.0% (J)):

1~50

Material:

R001: MnCuSn, R002~R007: MnCu, R008~R050: FeCrAl

Power Rating @70°C:

1W, 2W

Max Rated Current:

44.72A, 63.25A

Max Overload Current:

100.00A, 141.42A

ResistanceRange(mΩ) (±0.5%):

7~450

ResistanceRange(mΩ) (±1.0% (F), ±2.0% (G), ±5.0% (J)):

0.5~500, 0.5~450

Material:

R0005: MnCuSn, R001~R006: MnCu, R007~R500: FeCrAl

Power Rating @70°C:

4W

Max Rated Current:

31.62A

Max Overload Current:

54.77A

ResistanceRange(mΩ) (±0.5%):

7~450

ResistanceRange(mΩ) (±1.0% (F), ±2.0% (G), ±5.0% (J)):

4~450

Material:

R004~R450: FeCrAl

√P/R may be used to determine the DC (Direct Current) or AC(Alternating Current) (RMS, root mean square value) of normal rated power. However, if the result value exceeds the highest current of regulated standards (paragraph 5), the highest normal rated power is to be used.

±50ppm/°C

-55 ~ +170°C

25°C ±5; humidity 60% ±20%

Ni: 2μm; Sn: 3μm

JIS C 5201-1 clause 4.8 T.C.R. (ppm/°C) = ((R2-R1) / R1(T2-T1)) X 10^6 R1: resistance at room temperature (T1) R2: resistance at 150°C (T2), Refer to Ratings, ±50ppm

JIS C 5201-1 clause 4.13 Overload power as follows: PCS1206: 4x; PCS2512-1W: 5x; PCS2512-2W: 5x; PCS2512-3W: 4x; PCS2728-4W: 3x; Rated power duration: 5secs, ΔR/R1 ±0.5%

JIS C 5201-1 clause 4.23.2; 1,000hrs at +170°C, ΔR/R1 ±1.0%

JIS C 5201-1 clause 4.18; 260°C ±5 for 10 seconds., ΔR/R1 ±0.5%

JIS C 5201-1 clause 4.19, -55°C to +150°C, 1,000cycles, 15min at each extreme, ΔR/R1 ±0.5%

JIS C 5201-1 clause 4.24, 1,000hrs@+85°C/85%RH, 10%Bias 1.5hrs “ON”,0.5hrs “OFF”, ΔR/R1 ±0.5%

JIS C 5201-1 clause 4.25, 1,000hrs@70 °C, 1.5hrs “ON”, 0.5hrs “OFF”, ΔR/R1 ±1.0%

JIS C 5201-1 clause 4.17, 245±5°C for 2±0.5secs, >95% coverage

JIS-C5201-1 clause 4.7, Applied 500VAC for 1 minute, and Limit surge current 50 mA (max.), No short or burned appearance

JIS-C5201-1 clause 4.15, Central part pressurizing force 5N ,10 seconds, No breakage

JIS-C5201-1 clause 4.32, Pressurizing force 17.7N,10 seconds, No breakage

JIS-C5201-1 clause 4.33, Bending once for 2mm,10 seconds, ΔR/R1 ±0.5%; No breakage

MIL-STD 202 Method 106, T=24 hours/cycle ,10 cycles, Steps 7a& 7b not required. Unpowered. (see figure), ΔR/R1 ±0.5%