TAP600 Series Datasheet

0.25Ω to 100KΩ

±10% Std., 5% available on request.

±150ppm/°C (others upon request)

5,000V DC, higher voltage on request, not exceeding max. power

600W at 70°C heat sink temperature or 85°C bottom case temperature. This value is only valid by using a thermal conduction to the heat sink Rth -cs<0.025°C/W.The value can be reached by using thermal transfer compound with a heat conductivity of 1w/mk. The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4μm

7K Vrms, 50Hz, 1min standard; up to 12k Vrms available

Up to 12KV Normwave (1.5/50 μsec)

10GΩ min. at 500V

42mm min.

14mm min.

≤80nH

≤110pF

≤40pF

-55°C to +150°C

2 Nm

1.8 Nm

8.33W/°C (0.12°C/W) element to case

Method:

1000 W/10 Sec. @ 70°C

Typical Results - ∆R:

0.4%

Method:

56 Days/40°C/ 95°C

Typical Results - ∆R:

0.25%

Method:

-55/+125/5 Cycles

Typical Results - ∆R:

0.20%

Method:

40g/4,000 Times

Typical Results - ∆R:

0.25%

Method:

2 - 500Hz/10g

Typical Results - ∆R:

0.25%

Method:

Pn 30 min. ON/30 min. OFF

Typical Results - ∆R:

0.40%

Method:

200N

Typical Results - ∆R:

0.05%