TBH Series Datasheet

Thick film element above 1Ω, Ni-Cu metal ele-ment below 1Ω

High Temperature Plastic

Solder coated phospher bronze

100% @ 25°C to 0% @ 150°C curve refer-enced to case temperature

1000 VDC

0.9Nm

-55°C to +150°C

0.1-10Ω @ ±200ppm11Ω-10KΩ @ ±50ppm

5°C/W

5%

25 Watts. Rating based on 25°C case tem-perature. The case temperature is to be used for the purposes of establishing the applied power limit. The case temperature must be made with thermocouple contacting the cen-ter of the component’s mounting tab mounted on designated heat sink.

0.1Ω - 10KΩ. Standard values listed at left, others available upon special request.

350V

Condition:

(1000hrs @ rated power)

Result:

max. ∆R ±1%

Condition:

(MIL-STD-202, method 106)

Result:

max. ∆R ±0.5%

Condition:

(2x rated power, not to exceed 1.5x max. operating voltage)

Result:

max. ∆R ±0.3%

Condition:

(MIL-STD-202, method 208)

Result:

-

Condition:

(MIL-STD-202, method 107, cond. F)

Result:

max. ∆R ±0.3%

Condition:

(MIL-STD-202, method 211, cond. A (pull test) 2.4N)

Result:

max. ∆R ±0.2%

Condition:

(MIL-STD-202, method 204, cond. D)

Result:

max. ∆R ±0.2%